Zirconia ceramic bearing ball
Zirconia ceramic bearing ball
Zirconia ceramic bearing ball
Zirconia ceramic bearing ball
Zirconia ceramic bearing ball

Zirconia Ceramic Bearing Ball ZrO2 Ball For Bearing

Zirconia bearing balls possess high strength, excellent toughness, resistance to high temperatures and corrosion, good wear resistance, non-magnetic properties, and superior self-lubricating capabilities. They serve as the core component of zirconia ceramic bearings and are suitable for applications in environments without lubricating medium pollution.

  • Brand:

    ATCERA
  • Item NO.:

    AT-YHG-ZCQ001
  • Materials

    Zirconia
  • Shapes

    Ball
  • Applications

    Mechanical Parts
Zirconia ceramic bearing ball

Properties of Zirconia Ceramic Bearing Ball

 

 

 

 

1. High Limiting Speed

Zirconia ceramic is lighter than steel, with a density approximately 78% of steel. Therefore, using zirconia balls as bearing rollers can reduce centrifugal force during operation, resulting in a higher limiting speed.

 

 

2. Longer Service Life

Zirconia ceramic balls are lightweight, leading to reduced centrifugal force during bearing operation, lower raceway loads, and a smaller friction coefficient. This translates to less wear and a significantly longer service life, exceeding that of ordinary steel ball bearings by a factor of five or more.

 

 

3. Lubrication-Free

Zirconia ceramic balls exhibit self-lubricating properties, often eliminating the need for lubricating oil or grease. This allows for applications in high-vacuum and high-purity environments, preventing contamination from lubricating greases.

 

 

4. Corrosion Resistance

Zirconia ceramic balls demonstrate excellent resistance to acids, alkalis, and other chemical corrosion, making them suitable for chemically corrosive environments.

ZrO2 bearing ball

Applications of Zirconia Bearing Ball

 

 

 

 

Zirconia ceramic balls, characterized by their wear resistance, non-magnetic properties, electrical insulation, resistance to acid and alkali corrosion, oil-free self-lubrication, low friction coefficient, lightweight nature, and high temperature tolerance, are used as bearing rollers in various industries such as machinery, chemicals, electronics, medical, high-temperature, metallurgy, and aerospace.

 

 

They ensure stable equipment operation, extended service life, and reduced maintenance costs.

 

 

 

 

 

 

 

 

 

Size Chart for Zirconia Ceramic Bearing Ball

We are committed to delivering optimal zirconia bearing balls tailored to your exact specifications. Our dedicated team ensures meticulous adherence to your instructions, striving to exceed customer expectations. Additionally, we offer the flexibility of customized sizes to accommodate your unique requirements.

 

 

 

Provide specific dimensions and parameter requirements, with a maximum available supply diameter of 63.5mm.

 

Zirconia Ceramic Bearing Ball
Item no. Diameter
(mm)
AT-YHG-ZCQ001 0.4
AT-YHG-ZCQ002 0.5
AT-YHG-ZCQ003 0.6
AT-YHG-ZCQ004 0.7
AT-YHG-ZCQ005 0.8
AT-YHG-ZCQ006 0.9
AT-YHG-ZCQ007 1
AT-YHG-ZCQ008 1.1
AT-YHG-ZCQ009 1.2
AT-YHG-ZCQ010 1.3
AT-YHG-ZCQ011 1.35
AT-YHG-ZCQ012 1.4
AT-YHG-ZCQ013 1.5
AT-YHG-ZCQ014 1.588
AT-YHG-ZCQ015 1.6
AT-YHG-ZCQ016 1.8
AT-YHG-ZCQ017 2
AT-YHG-ZCQ018 2.381
AT-YHG-ZCQ019 2.5
AT-YHG-ZCQ020 2.778
AT-YHG-ZCQ021 2.8
AT-YHG-ZCQ022 3
AT-YHG-ZCQ023 3.175
AT-YHG-ZCQ024 3.5
AT-YHG-ZCQ025 3.969
AT-YHG-ZCQ026 4
AT-YHG-ZCQ027 4.5
AT-YHG-ZCQ028 4.763
AT-YHG-ZCQ029 5
AT-YHG-ZCQ030 5.5
AT-YHG-ZCQ031 5.536
AT-YHG-ZCQ032 5.953
AT-YHG-ZCQ033 6
AT-YHG-ZCQ034 6.35
AT-YHG-ZCQ035 6.747
AT-YHG-ZCQ036 7
AT-YHG-ZCQ037 7.144
AT-YHG-ZCQ038 8
AT-YHG-ZCQ039 8.731
AT-YHG-ZCQ040 9
AT-YHG-ZCQ041 9.525
AT-YHG-ZCQ042 10
AT-YHG-ZCQ043 10.3188
AT-YHG-ZCQ044 11
AT-YHG-ZCQ045 11.1125
AT-YHG-ZCQ046 11.906
AT-YHG-ZCQ047 12
AT-YHG-ZCQ048 12.303
AT-YHG-ZCQ049 12.7
AT-YHG-ZCQ050 13.494
AT-YHG-ZCQ051 14
AT-YHG-ZCQ052 14.288
AT-YHG-ZCQ053 15
AT-YHG-ZCQ054 15.875
AT-YHG-ZCQ055 16
AT-YHG-ZCQ056 17.4625
AT-YHG-ZCQ057 18
AT-YHG-ZCQ058 18.256
AT-YHG-ZCQ059 19.05
AT-YHG-ZCQ060 19.844
AT-YHG-ZCQ061 20
AT-YHG-ZCQ062 20638
AT-YHG-ZCQ063 22.225
AT-YHG-ZCQ064 23.812
AT-YHG-ZCQ065 25.4
AT-YHG-ZCQ066 25.875
AT-YHG-ZCQ067 26.988
AT-YHG-ZCQ068 30
AT-YHG-ZCQ069 30.163
AT-YHG-ZCQ070 31.75
AT-YHG-ZCQ071 32
AT-YHG-ZCQ072 34.925
AT-YHG-ZCQ073 35
AT-YHG-ZCQ074 36
AT-YHG-ZCQ075 38.1
AT-YHG-ZCQ076 40
AT-YHG-ZCQ077 42
AT-YHG-ZCQ078 44.45
AT-YHG-ZCQ079 45
AT-YHG-ZCQ080 50.8
AT-YHG-ZCQ081 55
AT-YHG-ZCQ082 63.5

 

 

Technical Data of Zirconium Oxide Materials

Material Zirconia (ZrO2)+ Stabilizing agent
Thermal Conductivity 3.0w/m.k
Temperature resistance 1000℃
Density 5.65-6.05g/cm3
Thermal Expansion Coefficient 0.00001/℃
Bending Strength 480-1000MPa
Hardness (Hv) 1200-1450HV1
Fracture Toughness 6-8MPa*m1/2
Hazardous Substances In compliance with EU ROHS standards

*This chart illustrates the standard characteristics of the zirconia materials commonly employed in the manufacturing of our zirconia products and parts. Please be aware that the attributes of customized zirconium oxide products  and parts may vary depending on the specific processes involved. Detailed parameter is decided by type and composition of stabilizing agent.

 

 

 

 

 

Usage Instructions

 
 
 
1. Prior to use, thoroughly clean the zirconia ceramic balls using acid or alkali wash methods to remove surface dirt and impurities.
 
 
 
 
2. Handle with care during transportation and assembly to avoid severe impacts that could lead to breakage or damage.

Valuable Information

 

Zirconia Ceramic Bearing Ball Packing

Zirconia Ceramic Bearing Ball Packing

 

 

 

 

Zirconia ceramic bearing balls are carefully packaged in appropriate containers to avoid any potential damage.

 

 

 

 

 

 

 

 

Customization Advantages
Customization Advantages

 

 

1. According to your application scenario, analyze the needs, choose the appropriate material and processing plan.

 

2. Professional team, quick response, can provide solutions and quotations within 24 hours after confirming the demand.

 

3. Flexible business cooperation mechanism, support at least one piece of quantity customization.

 

4. Quickly provide samples and test reports to confirm that the product meets your needs.

 

5. Provide product use and maintenance suggestions to reduce your cost of use.

Related Blog
What Are the Versatile Applications of ZrO2 Ceramics in Catalysts and Functional Materials?
In the vast world of materials science, zirconium oxide (ZrO₂) stands out for its unique physical and chemical properties, and has become a research hotspot in many fields. As an oxide with acidic center, alkaline center, oxidation and reducibility, zirconia not only has strong interaction with the active components of catalysts, but also shows great application potential in many fields such as ca...
Why Are Transparent Ceramics Promising for High Power Laser Applications?
With the rapid development of solid high power laser technology, the performance requirements of laser dielectric materials are increasing day by day. As a kind of material with unique physical and chemical properties, transparent ceramic has shown great application potential in the laser field due to its advantages of low phonon energy, low thermal expansion coefficient, high thermal conductivity...
Why Are Transparent Ceramics Significant Advances in Modern Laser Technology?
With the continuous development of modern laser technology, the requirements for laser gain media are also increasing. As a new type of laser material, transparent ceramics show significant advantages in the generation of ultra-short and ultra-strong laser. Compared with traditional single crystal media and glass materials, transparent ceramics not only have higher thermal conductivity and better ...
Could Transparent Ceramics Outshine Monocrystalline Materials in Preparation Cost?
In the field of modern materials science, transparent ceramics and monocrystalline materials show extensive application potential in many fields such as optics, electronics and medical treatment because of their unique physical and chemical properties. However, from the point of view of material preparation, there are significant differences between the two in terms of process complexity, producti...
How Does the Pressing Process Influence the Performance of Silicon Carbide Crucibles?
Silicon carbide crucible is widely used in high temperature industries such as ceramics, metallurgy and glass because of its excellent high temperature resistance, corrosion resistance and high strength. Press forming is a common forming method in the manufacture of sic crucible. Its technological process and parameter control have important influence on the final performance of crucible. The...
What Makes Silicon Carbide Crucible Indispensable in High-Temperature Industry?
With the continuous development of modern high-temperature industrial technology, the requirements for material properties are increasing. Silicon carbide crucible, with its unique material composition and a series of excellent properties, has become an indispensable material in the high-temperature industrial field. The purpose of this article is to discuss the seven excellent properties of ...
Optimizing Silicon Carbide Crucible Performance: Material & Process
With the continuous progress of ceramic materials science and technology, silicon carbide (SiC), as a class of high-performance non-oxide ceramic materials, has shown great application potential in many industrial fields because of its unique physical and chemical properties. Especially in high temperature kilns, silicon carbide crucible, with its excellent high temperature resistance, corrosion r...
How to Efficiently Prepare and Optimize Aluminum Nitride Ceramic Copper Clad Plates?
With the rapid development of power electronic technology, especially the wide application of power semiconductor devices such as high voltage, high current and high frequency IGBT modules, more stringent requirements are put forward for ceramic copper-covered substrates. As a kind of ceramic material with high thermal conductivity, low dielectric constant and good mechanical properties, aluminum ...
Which Ceramic Substrate Material is Optimal for High-Power IGBT Module Packaging?
In modern power electronics systems, the IGBT (insulated gate bipolar transistor) module is the core component of energy conversion and control, and its long-term stability and reliability are very important. As the key component of IGBT module package structure, ceramic clad substrate not only carries the circuit components, but also bears the heavy task of heat conduction, which directly affects...
How Does Ultrahigh Pressure Enable the Preparation of Nanostructured Transparent Ceramics?
As a kind of high-efficiency material, transparent ceramics show great application potential in optics, electronics, aerospace and other fields because of its unique optical transmittance, high strength and good thermal stability. However, the traditional methods of preparing transparent ceramics often face challenges such as abnormal grain growth, high sintering temperature and complicated p...

Related Products

FAQ

Although our primary focus is on advanced ceramic materials such as alumina, zirconia, silicon carbide, silicon nitride, aluminum nitride, and quartz ceramics, we are always exploring new materials and technologies. If you have a specific material requirement, please contact us, and we will do our best to fulfill your needs or find suitable partners.

Absolutely. Our technical team possesses profound knowledge of ceramic materials and extensive experience in product design. We are happy to provide you with material selection advice and product design support to ensure optimal performance for your products.

We do not have a fixed minimum order value requirement. We always focus on meeting our customers' needs, and we strive to provide quality service and products regardless of the order size.

In addition to ceramic products, we also provide a range of additional services, including but not limited to: customized ceramic processing services based on your needs, using blanks or semi-finished blanks produced by yourself; if you are interested in outsourced ceramic packaging and metallization services, please contact us for further discussion. We are always committed to providing you with a one-stop solution to meet your various needs.

Yes, we do. No matter where you are located globally, we can ensure the safe and timely delivery of your order.

Send Your inquiry

Upload
* File ONLY PDF/JPG./PNG. Available.
Submit Now

Contact With Us

Contact With Us
Simply fill out the form below as best you can. And don't sweat the details.
Submit
Looking for Video?
Contact Us #
19311583352

Office Hours

  • Monday to Friday: 9:00 AM - 12:00 PM, 2:00 PM - 5:30 PM

Please note that our office hours are based on Beijing Time, which is eight hours ahead of Greenwich Mean Time (GMT). We appreciate your understanding and cooperation in scheduling your inquiries and meetings accordingly. For any urgent matters or queries outside our regular hours, feel free to contact us via email, and we will get back to you as soon as possible. Thank you for your business, and we look forward to serving you.

Home

Products

whatsApp

contact